Beli syringe filter di monotaro.id

Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.Features & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating - Medical Device-rated devices in some countries including vented devices for direct patient care - Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection - Low extractables and low absorption membranes for minimum sample losses - Faster flow rates and higher operating pressures for high performance needs Applications:Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule Components, Select Medical Device Applications (Some Including Direct Patient Care Depending on Country/Region)

SLCRX13NL: 100 per packSLCRX13NK: 1000 per packHPLC-certified for low levels of UV-absorbing extractables.Applications:Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Clarification of Aqueous and Organic SolutionsOverview of Non-Sterile Millex Syringe Filters with Hydrophilic PTFE- Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS- Filtration of protein-containing aqueous or organic solutions- Available in 0.20 μm and 0.45 μm pore sizes and three diameters to suit your application needs - Polypropylene housing material offers low levels of extractables and broad chemical compatibility

-It is a product with excellent cost performance that realized reasonable price without dropping quality. -Filtration of non aqueous sample solution.-Hydrophobicity.-This has resistance against organic solvents, acid, or alkali. Non-Pyrogenic, DNA-free.-For filtration of strong chemical corrosive organic solvents, or filtration of strong acid solutions, alkali solvents, and alcohol.-Autoclave sterilization is possible.

These Corning® syringe filters have acrylic copolymer housings, female Luer lock inlets and male Luer slip outlets.- Surfactant-free cellulose acetate (SFCA) membranes provide the lowest protein binding- 100% integrity tested, sterile and nonpyrogenic and noncytotoxic- Manufactured in accordance with ISO 9001 standards

Millex syringe filter units with hydrophobic Fluoropore or Millipore Express PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore membrane can also be used for sterilizing or clarifying organic solutions. There are also specialized filter units to protect hemodialysis transducers from blood and moisture. The 50 mm Millex filter units are especially useful for vacuum line protection. All units are bi-directional.Features & Benefits:- Specialized filter units protect hemodialysis transducers from blood and moisture - 50 mm Millex units ideal for vacuum line protection - All Millex Hydrophobic PTFE units are bi-directional in flow Applications:Sterilizing Gases, Vacuum Line Protection, Venting Sterile Containers, Sterilizing and Clarifying Organic Solutions

Use Cole-Parmer single-use syringe filters for clarification and prefiltration, and even for removing fine particulate with the membrane’s large effective filtration area. Reinforced polypropylene housing has secure connections for male luer slip outlet and female luer lock inlet. Sterile syringe filters are individually packaged in an easy-open blister pack. The membrane type and pore size are visible on each filter housing as well.

Nonsterile syringe filters are used for purifying samples and general purpose filtering activities when sterilization is not required. The filter is attached to the syringe after the sample is drawn then the liquid is filtered as the sample is expelled from the syringe. Filters are disposed of after a single use.

Sterile syringe filters sterilize samples and solutions prior to dissolution testing, chromatography, and ICP analysis. The filter is attached to the syringe after the sample is drawn, then the liquid is filtered as the sample is expelled from the syringe. These filters can also be used to clarify sterile solutions before use. Filters are disposed of after a single use.

Nonsterile syringe filters are used for purifying samples and general purpose filtering activities when sterilization is not required. The filter is attached to the syringe after the sample is drawn then the liquid is filtered as the sample is expelled from the syringe. Filters are disposed of after a single use.

SLCR033NS: 50 per packSLCR033NB: 250 per packSLCR033NK: 1000 per packHPLC-certified for low levels of UV-absorbing extractables.Applications:Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Clarification of Aqueous and Organic SolutionsOverview of Non-Sterile Millex Syringe Filters with Hydrophilic PTFE- Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS- Filtration of protein-containing aqueous or organic solutions- Available in 0.20 μm and 0.45 μm pore sizes and three diameters to suit your application needs - Polypropylene housing material offers low levels of extractables and broad chemical compatibility

CA Syringe FilterLabfil- Alwsci Scientific0.22 micrometer filters are largely used in Analysis field for sample preparation, 25mm diameter at your choice and type of membrane CA

These Corning® syringe filters have acrylic copolymer housings, female Luer lock inlets and male Luer slip outlets.- Surfactant-free cellulose acetate (SFCA) membranes provide the lowest protein binding- 100% integrity tested, sterile and nonpyrogenic and noncytotoxic- Manufactured in accordance with ISO 9001 standards

Overview of Non-Sterile Millex Syringe Filters with Hydrophobic Fluoropore (PTFE) Membrane:- Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of atmospheric moisture in venting applications.- Broad chemical compatibility and excellent solvent resistance with organic solutions - Available in 0.20 µm, 0.45 µm, and 5.0 µm pore sizes and three diameters to suit your application needs - Housing is made from a low-extractable, high density polyethylene (HDPE) or polypropylene.Available in Multiple Pack Sizes:SKU ending with NS (-------NS): 50 per packSKU ending with NL (-------NL): 100 per packSKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outletSKU ending with NB (-------NB): 250 per packSKU ending with NK (-------NK): 1000 per packApplications: Fine Particle Removal and Clarification of Organic Solutions, Vent Filtration, Sterilization of Gases